Product Overview
Channels: 128 channels, 8 zones
Output Power: 45W
Frequencies: 136-174MHz, 400-470MHz, 450-512MHz
Programmable Keys: 6
Features
Front Mounted Speaker
4 watts (typ.) Front-Mounted speakers deliver clear and loud audio. With the speaker facing the operator, audio can be clearly heard without impediment during operations.
MIL Grade Rugged Construction
The tough aluminum die-cast chassis and polycarbonate front panel have been tested to the MIL standard 810F. With this heavy-duty construction, the F5021 Series provides reliable operation over the long term in all manners of rugged environments.
Most Popular Signalings Built-in
Use the built-in 2-Tone, 5-Tone, CTCSS and DTCS capabilities as standard to set up your own talk groups, PTT ID and quiet stand-by when others are talking. The F5021 Series has added CTCSS/DTCS high speed decode and 2-Tone decode accuracy.
MDC 1200 Compatible
The following MDC features are available with the built-in MDC signaling.
- PTT ID (TX/RX)
- Radio check (RX)
- Radio stun (RX)
- Radio revive (RX)
- Emergency TX/RX (No ACK)
- 5 alias table (max.)
Multiple 2-Tone, Multiple 5-Tone
Multiple 2-Tone, Multiple 5-Tone Up to 10 2-Tone and eight 5-Tone codes can be decoded on a channel. When a matched tone is received, the following items are programmable for each code.
- Beep sound
- Answer back
- Scan
- Bell icon
- Radio stun/kill/revive
Radio Kill, Stun and Revive
The radio kill/stun functions disable a lost or stolen radio over the air, eliminating security threats from undesired listeners. When the stun command is received, all functions will be temporarily locked out until the revive command is received or the unlock password is entered.
Lone Worker Function
When the radio is not operated for a present period, the radio sounds a beep and requires you to push any button. If the radio is still not operated for a specified wait period, an emergency signal automatically transmits and informs co-workers that something may have happened to the individual worker.
Mode Dependent Scan
In the mode-dependent setting, the scanning setting is dependent on the operating channel. When you change the operating channel the scanning list automatically changes the list set for that channel. It is convenient when you move to a different operating area and change the operating channel, you don’t have to change the scanning setting.
Tx Channel Setting and TalkBack Function
The Tx channel setting allows you to program a transmission channel while scanning. Start channel, last detected channel, priority and preprogrammed channels are selectable. Prior to the Tx channel setting, the talkback function allows you to talk on the last detected channel, while scanning resumes after a preset time. The user can easily make a quick response with this function.
Optional Unit
The 5021 Series has a 40–pin option slot for adding an optional unit. Optional voice scrambler units, UT-109R or UT-110R provide secure private conversation. Optional DTMF decoder unit, UT-108R offers DTMF decode capability.
External memory Channel Control with Optional ACC Cable
External memory channel: With the optional OPC-1939 D-SUB 15-pin ACC cable, the F5021 Series can be programmed to control an operating channel from an external device (up to 16 preprogrammed channels). The ACC connector also provides an ignition-sensing function, external PTT, PC command, honk honk, audio output and modulated signal input depending on programming.
Other Features
- Wide/narrow (25/12.5kHz) channel spacing
- Embedded ESN
- ±2.5ppm frequency stability
- Microphone hanger action programmable
- 8 DTMF autodial memories
- Power-on password function
- Nuisance delete function
- Time-out-timer, lock-out penalty timer and more
